ok so me and mike are both making one, i just want to kno if i need any other screws/parts to make it, here is the lisy

1.Doc Nickels Fastback half block cocker body with hammer bolt pumparm adn cocking block.
2.Nexus Ram, QEVs
3.Dye sticky 3s
4.Pneumatic hosing
5.Hammer lug
6.Belsales 3 way
7.Freeflow spring kit
8.Docs flat top front block screw
9.Freeflow vavle
10.jackal 90 degree pivot trigger frame
11.Jackal front block
12.Kapp actuating rod
13.Kapp IVG
14.Kapp screw kit, with 2 gripframe screws, 4 grip screws, 2 actuating rod screws, and 1 vavle plug
15.eclipse fangz detent
16.Screw kit with vavle retaining screw, front block screw, adn 1 ASA screw
17.Palmers Micro rock LPr
18.WGP O-ring kit
19. WGPparts kit with o-rings,trigger springs,3 way shaft,cup seal,air barbs,cupplers,and valve tool
20. 14 cp 1 piece barrel
I have a vert reg, ASA and hose

If u want links to anything ive got it

Sounds nice, lotta monies but have fun..

when you say front block screw do you mean front block plug? make sure you have evrything in

their and your going to need a valve locking nut. (not valve fastening screw). id strongly suggest not to get a fang detent

just go to here and read up

The image and the link aren't working. I've also heard bad things about the fang.

the link leads to my post in docs forums.

mike, ive got the plug, and u kno what im talking about since we pretty much discussed everything]

I see mike, double http. Tricky...